DoorDam 1800™: Includes J-Braces, Compression Clips, Z-Brackets & all hardware.  Specialty brackets sold separately.
• For minor to moderate flash flooding, storm drain overflow, etc.
• Holds back up to 16-inches of water

Prices below:               Price        Weight (lbs)       

• DDA18X24  24-28"     $378              19                                  
• DDA18X28  28-32"     $398              20                                   
• DDA18X31  31-35"     $418              21                                   
• DDA18X34  34-38"     $458              24                                   
• DDA18X37  37-41"     $478              25                                   
• DDA18X40  40-44"     $498              26                                   
• DDA18X43  43-47"     $548              29
• DDA18X46  46-50"     $568              30

 Please note: Correct measurements are customer's responsibility. Please ensure you are ordering the correct size DoorDam and note our Warranty for all purchases.  If 2 or more panels are needed to protect your opening, make sure you order a Mullion with the Mullion Drill Bit and the Setting Tool.  Please call 866-366-7326 and speak with a specialist to get help.  Panels adjust a total of 4-inches in width.

DoorDam 2600™: Includes J-Braces, Compression Clips, Z-Brackets & all hardware.  Specialty brackets sold separately.
• For heavy flooding, hurricane protection, etc.
• Holds back up to 24-inches of water

Prices below:                 Price           Weight (lbs)        

• DDA26X24  24-28"     $478                 27
• DDA26X28  28-32"     $498                 28
• DDA26X31  31-35"     $528                 30
• DDA26X34  34-38"     $578                 31
• DDA26X37  37-41"     $598                 36
• DDA26X40  40-44"     $648                 37
• DDA26X43  43-47"     $678                 40
• DDA26X46  46-50"     $698                 42 

 
Please note: Correct measurements are customer's responsibility. Please ensure you are ordering the correct size DoorDam and note our Warranty for all purchases.  If 2 or more panels are needed to protect your opening, make sure you order a Mullion with the Mullion Drill Bit and the Setting Tool.  Please call 866-366-7326 and speak with a specialist to get help.  Panels adjust a total of 4-inches in width.

SALE on 2009 Style 26" high DoorDam for protection from waters up to 24"

2009 DoorDam 26 :Includes J-Braces, Compression Clips, & all hardware.  ALL brackets sold separately ($50/each on sale).

Brackets (photo not shown):

2009 26'' L-Bracket: PR32523

2009 26'' LEFT Face/RIGHT Corner Z-Bracket: PR32522

2009 26'' RIGHT Face/LEFT Corner Z-Bracket: PR33067

2009 26'' 7'' LEFT Spacer Bracket: PR33278

2009 26'' 7'' RIGHT Spacer Bracket: PR33261

SALE Prices ONLY while supply lasts!

• 10460-12  28-32"     was $449   now $375
• 10460-05  31-35"     was $459   now $385
• 10460-01  34-38"     was $470   now $395
• 10460-02  37-41"     was $499   now $420   
• 10460-07  40-44"     was $499   now $420   (OUT OF STOCK)
• 10460-08  43-47"     was $549   now $460   (ONLY 1 LEFT)
• 10460-09  46-50"     was $549   now $460   (ONLY 1 LEFT)
• 10460-11  52-56"     was $549   now $460   (OUT OF STOCK)

Please note: Correct measurements are customer's responsibility. Please ensure you are ordering the correct size DoorDam and note our Warranty for all purchases.  (2) J-braces are standard with the initial purchase of the panel to ensure proper usage in the jamb.  If 2 or more panels are needed to protect your opening, make sure you order a Mullion with the Mullion Drill Bit and the Setting Tool.  Please call 866-366-7326 and speak with a specialist to get help.  Panels adjust a total of 4-inches in width.

DoorDam 3600™: Includes J-Braces, Compression Clips, & all hardware.  ALL brackets sold separately ($69/each).
• For severe flooding and heavy-duty hurricane  protection, etc.
• Holds back up to 34-inches of water

Prices below:              Price        Weight (lbs)        

• DDS36X25  25-28"     $615              50
• DDS36X28  28-32"     $615              52
• DDS36X31  31-35"     $625              55
• DDS36X34  34-38"     $685              58
• DDS36X37  37-41"     $685              60
• DDS36X40  40-44"     $715              61
• DDS36X43  43-47"     $715              67
• DDS36X46  46-50"     $715              70

 
Please note: Correct measurements are customer's responsibility. Please ensure you are ordering the correct size DoorDam and note our Warranty for all purchases.  (2) J-braces are standard with the initial purchase of the panel to ensure proper usage in the jamb.  If 2 or more panels are needed to protect your opening, make sure you order a Mullion with the Mullion Drill Bit and the Setting Tool.  Please call 866-366-7326 and speak with a specialist to get help.  Panels adjust a total of 4-inches in width.

7/8" Masonry drill bit needed to install the DoorDam 1800 and 2600 Mullions ($26) 

• This part is also needed when your opening requires the DoorDam 7'' Spacer Z-Brackets

Mullion used to connect two DoorDam 1800 panels ($114).  Make sure that if you will be using the 18'' Mullion to also add the DoorDam 1800 Mullion Drill bit and 1800 Setting Tool (each sold separately)

Technical Info:

• Requires the 1800/2600 Mullion Drill Bit 2941A42 and the 1800/2600 Setting Tool 97020A122 (each sold separately)
• Foot is 11-inches front to back
• 14 pounds each 

• Need 20-inches height clearance

Jamb Bracket included with every 2010 DoorDam 1800 panel sold.  Used with DoorDam 1800's in two situations: 1) for mounting within a jamb opening so that the DoorDam sits at the front edge of the opening (i.e.a "reinforced corner mount" Style 2) or 2) for mounting outside or inside on a building's wall wider than the opening so that the building takes at least 1" of the load pressing against the DoorDam (i.e. a "face mount" Style 3).

 Prices:

• Brackets       Replacement Price          $30/each

Technical Info:

• Wing is 2.25-inches wide
• 6 pounds each
• Need 21-inches height clearance

Jamb Bracket included with every 2010 DoorDam 1800 panel sold.  Used with DoorDam 1800's in two situations: 1) for mounting within a jamb opening so that the DoorDam sits at the front edge of the opening (i.e.a "reinforced corner mount" Style 2) or 2) for mounting outside or inside on a building's wall wider than the opening so that the building takes at least 1" of the load pressing against the DoorDam (i.e. a "face mount" Style 3).

 Prices:

• Brackets       Replacement Price          $30/each

Technical Info:

• Wing is 2.25-inches wide
• 6 pounds each
• Need 21-inches height clearance

1-1/8" Masonry drill bit needed to install the DoorDam 3600 Mullions ($36.95) 

Specialty L-Bracket used for mounting DoorDam 1800 within a jamb opening where there is sufficient depth for the entire DoorDam to fit inside the jamb ($30/each)

Need a Left and a Right:

DDA-L-BRK-L-18

DDA-L-BRK-R-18

 Technical Info:

• Wing is 2-inches wide
• 5 pounds each
• Need 21-inches height clearance

DoorDam 2600 7" Spacer Bracket for a situation where there is an obstruction on either or both sides of the opening.  Examples: hurricane shutters, electrical outlets, door frames, etc. ($125/each)

Need a Left and a Right:

DDA-SZ-BRK-L-26

DDA-SZ-BRK-R-26

Technical Info:

• 4-inches left to right from coner of opening
• total of 8-inches front to back
• 20 pounds each

Please see page 10 of the DoorDam 1800 & 2600 User Manual for further technical information.  You will need to order the 1800 & 2600 Mullion Drill bit (2941A42 $26) and Setting tool (97020A122 $21.95) with this part.

This 1/2" DoorDam Setting Tool is needed for the DoorDam 1800 & 2600 Mullion application and all of the 7" Spacer Bracket applications ($21.95)

This 5/8" DoorDam Setting Tool is needed for the DoorDam 3600 Mullion application ($31.95)

DoorDam 1800 7" Spacer Bracket for a situation where there is an obstruction on either or both sides of the opening.  Examples: hurricane shutters, electrical outlets, door frames, etc. ($114/each)

Need a Left and a Right:

DDA-SZ-BRK-L-18

DDA-SZ-BRK-R-18

Technical Info:

• 4-inches left to right from coner of opening
• total of 8-inches front to back
• 15 pounds each

Please see page 10 of the DoorDam 1800 & 2600 User Manual for further technical information.  You will need to order the 1800 & 2600 Mullion Drill bit (2941A42 $26) and Setting tool (97020A122 $21.95) with this part.

DoorDam 3600 7" Spacer Bracket for a situation where there is an obstruction on either or both sides of the opening.  Examples: hurricane shutters, electrical outlets, door frames, etc. ($137.50/each)

Need a Left and a Right:

DDS-SZ-BRK-L-36

DDS-SZ-BRK-R-36Technical Info:

• 4-inches left to right from coner of opening
• total of 8-inches front to back
• 25 pounds each

Please see page 10 of the DoorDam 3600 User Manual for further technical information.  You will need to order the 1800 & 2600 Mullion Drill bit (2941A42 $26) and Setting tool (97020A122 $21.95) with this part.

 Mullion used to connect two DoorDam 2600 panels ($144).  Make sure that if you will be using the 26'' Mullion to also add the DoorDam 2600 Mullion Drill bit and 2600 Setting Tool (each sold separately)

Technical Info:

• Requires the 1800/2600 Mullion Drill Bit 2941A42 and the 1800/2600 Setting Tool 97020A122 (each sold separately)
• Foot is 11-inches front to back
• 15 pounds each

• Need 28-inches height clearance

Mullion used to connect two DoorDam 3600 panels ($169).  Make sure that if you will be using the 36'' Mullion to also add the DoorDam 3600 Mullion Drill bit and 3600 Setting Tool (each sold separately). 

Technical Info:

• Requires the 3600 Mullion Drill bit 8897A29 and 3600 Setting Tool 97020A123 (each sold separately)
• Foot is 11-inches front to back 
• 17 pounds each

• Need 38.5-inches height clearance

   

 Specialty L-Bracket used for mounting DoorDam 2600 within a jamb opening where there is sufficient depth for the entire DoorDam to fit inside the jamb ($40/each)

Need a Left and a Right:

DDA-L-BRK-L-26

DDA-L-BRK-R-26

Technical Info:

• Wing is 2-inches wide
• 6 pounds each
• Need 29-inches height clearance

L-Bracket used for mounting DoorDam 3600 within a jamb opening where there is sufficient depth for the entire DoorDam to fit inside the jamb ($69/each)

Technical Info:

• Wing is 3-inches wide
• 15 pounds each
• Need 36-inches height clearance

Z-Bracket included with every 2010 DoorDam 2600 panel sold.  Used with DoorDam 2600's in two situations: 1) for mounting within a jamb opening so that the DoorDam sits at the front edge of the opening (i.e.a "reinforced corner mount" Style 2) or 2) for mounting outside or inside on a building's wall wider than the opening so that the building takes at least 1" of the load pressing against the DoorDam (i.e. a "face mount" Style 3).

 Prices:

• 2010 Brackets                          Replacement Price    $40/each

Technical Info:

• Wing is 2.25-inches wide
• 7 pounds each
• Need 29-inches height clearance

Z-Bracket included with every 2010 DoorDam 2600 panel sold.  Used with DoorDam 2600's in two situations: 1) for mounting within a jamb opening so that the DoorDam sits at the front edge of the opening (i.e.a "reinforced corner mount" Style 2) or 2) for mounting outside or inside on a building's wall wider than the opening so that the building takes at least 1" of the load pressing against the DoorDam (i.e. a "face mount" Style 3).

Prices:

• 2010 Brackets                          Replacement Price    $40/each

Technical Info:

• Wing is 2.25-inches wide
• 7 pounds each
• Need 29-inches height clearance

Z-Bracket used with DoorDam 3600's in two situations: 1) for mounting within a jamb opening so that the DoorDam sits at the front edge of the opening (i.e.a "reinforced corner mount" Style 2) or 2) for mounting outside or inside on a building's wall wider than the opening so that the building takes at least 1" of the load pressing against the DoorDam (i.e. a "face mount" Style 3) ($69/each)

Technical Info:

• Wing is 3.25-inches wide
• 20 pounds each

• Need 39-inches height clearance

Z-Bracket used with DoorDam 3600's in two situations: 1) for mounting within a jamb opening so that the DoorDam sits at the front edge of the opening (i.e.a "reinforced corner mount" Style 2) or 2) for mounting outside or inside on a building's wall wider than the opening so that the building takes at least 1" of the load pressing against the DoorDam (i.e. a "face mount" Style 3) ($69/each)

Technical Info:

• Wing is 3.25-inches wide
• 20 pounds each

• Need 39-inches height clearance

  
  

DAP® Ready-Mixed Concrete Patch can be used to patch small cracks and breaks or to spot level concrete and masonry surfaces such as basement walls, patios, steps and driveways. It dries to a durable, hard finish and is non-shrinking. For interior or exterior use. ($7.26 for (1)qt or $37.03 for (1)case (6)qt)

DAP® Liquid Cement Crack Filler is an easy-to-use, ready-mixed product for the repair of cracks in concrete. Repairs are ready for traffic in 30-45 minutes. It is self-leveling and dries gray to match most existing concrete. Interior/exterior use. ($10.54 (1)qt or $53.74 (1)case of (6)qt)

DAP®’s Revolutionary Titanium-enriched silicone offers maximum flexibility and strength, making it up to 50% more flexible than other premium silicones. Offers superior adhesion to difficult surfaces such as PVC, vinyl siding, window and painted wood. Interior/exterior use. Lifetime Durability Guarantee. Meets ASTM Specification C 920, Class 25. ($7.83 for (1) 10.3oz tube or $79.89 for case of 12 10.3oz tubes)

This is a unique removable weather-strip caulk provides a watertight and weatherproof seal. Seals out moisture. Peels away easily when removal is desired. Won't damage painted surfaces. Interior/exterior use. ($7.37 (1) 10.3oz tube or $79.89 for a case of (12) 10.3oz tubes)

For use with various caulks. ($4.95)

This kit allows you to prepare your opening for installation and deployment of your DoorDam(s). The kit contains two quarts of Ready Mix Concrete Patch, one quart of Liquid Cement Crack Filler, two putty knives, four Ti Silicone Window & Door Sealant tubes, six tubes of Seal n Peel Removable Caulk, and a caulk gun. ($89.98)

This kit comes with two quarts of Ready Mix Concrete Patch, one quart of Liquid Cement Crack Filler and two putty knives. ($24.22)

This kit comes with four Ti Silicone Window & Door Sealant tubes, 6 tubes of Seal n Peel Removable Caulk,  and a caulk gun. (over $97 value is purchased separately) ($79.98)

Used with either DoorDam 3600 or remaining inventory of 2009 DoorDam 2600 when the jamb opening is completely plumb and sufficiently smooth to allow the DoorDam to expand tightly against the sides of the opening and there is a building detail such as a recess that will take the water load. Also used with compression clips to provide downward corner force when using L-brackets for jamb openings. (Style 1) ($17)

Bright Yellow handle for use with DoorDam 1800 and 2600 models (Replacement Price $24)

Replacement neoprene jacket for DoorDam 1800, 2600 and 3600 (Models vary per DoorDam height and width).

Prices:

• DDA-SP-18     $220

• DDA-SP-26     $240

• DDS-SP-36     $249

Replacement debris guard for DoorDam 1800, 2600, and 3600 (Models vary per DoorDam height and width).

Prices:

• DDA-DS-18     $85

• DDA-DS-26     $110

• DDS-DS-36     $169

Used with either DoorDam 1800 or 2600 when the opening is completely plumb and sufficiently smooth to allow the DoorDam to expand tightly against the sides of the opening and there is a building detail such as a recess that will take the water load. Also used with compression clips to provide downward corner force when using L-brackets for jamb openings. (Style 1) (Replacement Price  $24)

Additional Info:

• Comes with all panels and brackets except the Specialty 7'' Spacer Z-Bracket

Provides downward pressure at corners where the DoorDam meets the wall.  Is used in comjunction with the J-Brace.  (Replacement Price  $15)

Technical Info:

• Wing is 2-inches wide
• Clip is approx. 4-inches high

Bright Yellow handle for use with DoorDam 3600 model (Replacement Price $30)